Rock Pi 4b V1.4 Rockchip Rk3399 Arm Cortex Six Core Sbc/Single Board Computer Compatible with Official Raspberry Pi Display

• Type: Dev.Board
• Chipset: Rk3399
• Origin: China
• Model NO.: ROCK PI 4B

Product Description

 

ROCK PI is a Single Board Computer (SBC) in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. The ROCK PI offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering their ideas into reality.

This is the documentation for ROCK Pi 4, written by Radxa Team with community contributions.
ROCK Pi 4 is a Rockchip RK3399 based SBC(Single Board Computer) by Radxa. It can run android or some Linux distributions. ROCK Pi 4 features a six core ARM processor, 64bit dual channel 3200Mb/s LPDDR4, up to 4K@60 HD-MI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, 802.11 ac WIFI, Bluetooth 5.0, USB Port, GbE LAN, 40-pin color expansion header, RTC. Also, ROCK Pi 4 supports USB PD and QC powering.
ROCK Pi 4 comes in two models, Model A and Model B, each model has 1GB, 2GB or 4GB ram options.

 

 

Class-Leading Performance
ROCK Pi has a modern and powerful hexa-core ARM based processor, RK3399 inside, it offers significantly improved performance versus other popular SBC boards. All models are equipped with LPDDR4 3200Mb/s RAM and optional high performance eMMC modules, boost all applications.

 

 

Maker Friendly, IoT Connectivity

ROCK Pi features maker friendly expansion options, including a 40-pin GPIO interface that allow for interfacing with a range inputs from buttons, switches, sensors, LEDs, and much more.
ROCK Pi also features a Gbit LAN for network, with dedicated bus and controller, it works without latency under heavy load network applications. On board 802.11 ac wifi offers 2.4G&5G WLAN connectivity. With Bluetooh 5.0, ROCK Pi benefits improved Bluetooth speed and greater range.
ROCK Pi also features one USB 3.0 host and one USB 3.0 OTG ports, each 5Gbps/s, working independently. The USB 3.0 OTG can work as USB device such as Android ADB or USB gadgets. A hardware switch is provided for OTG mode switch.

 

 

AI Capabilities

ROCK Pi supports mainstream AI stack with GPU acceleration. Further more, a dedicated hardware NPU accelerator coming up next for ROCK Pi will boosts complex Machine Learning algorithm and reduce the power.
Industrial standard MIPI CSI connector makes it easy to connect exsit cameras to ROCK Pi and ROCK Pi also supports industrial standard MIPI DSI for LCD and touch screen. With hardware accelerated algorithm, it's great for Computer Vision application, Robotics and much more.

 

 

 

What you need

Necessary

1. ROCK Pi 4 main board

•     ROCK Pi 4 Model A or Model B

2. One of the Storage media below:

•     μSD card, larger than 8GB.
•     eMMC Module , larger than 8GB with eMMC to μSD converter board.

3. Power supply

•     The ROCK Pi 4 is powered by Type-C port and has a wide range of input voltage, from 9V to 21V. The Pi supports USB Type-C PD 2.0 with 9V/2A, 12V/2A, 15V/2A and 20V/2A. Besides, the Pi supports QC 3.0/2.0 with 9V/2A and 12V/1.5A.
•    The Type-C cable you using needs to support data communication. We call it USB Type-C charging data cable.

4. USB Keyboard and Mouse

• With four USB-A connectors, ROCK Pi 4 can be equipped with a full sized keyboard and mouse.

5. Monitor and HD-MI Cable

• ROCK Pi 4 is equipped with a full sized HD-MI connector. HD-MI capable monitor is recommended.
• HD-MI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.

6. USB to TTL serial cable

• ROCK Pi 4 exports a dedicated serial console, which can access the low level debug message.

7. USB Male A to Male A cable

• If you want write image on ROCK Pi 4 from USB OTG port or use fastboot/adb commands you need an USB Male A to Male A cable to connect ROCK Pi 4 and PC.

 

 

Optional

1. μSD Card Reader

• For flashing the image into μSD Card or eMMC Module.

2. USB type A to type A cable

• This is needed for fastboot/adb commands.

3. USB to TTL serial cable

• This is needed for serial console.

4. Ethernet cable

• ROCK Pi 4 supports Internet access via WIFI or Ethernet.
• An Ethernet cable is used to connect your ROCK Pi 4 to a local network and the Internet.

5. Camera Module

• ROCK Pi 4 supports camera function.

6.LCD Module

• ROCK Pi 4 supports LCD display function.

7. Audio cable

• Audio can be played through speaker or headphones using a standard 3.5mm jack.

 

 

 

 

Close look of ROCK Pi 4B

 

 

Performance

CPU Performance

ROCK Pi features an ARM-based RK3399 SoC and is equipped with six cores to enhance multithread applicationperformance

GPU Performance

    ROCK Pi's GPU is based on the Mali'"-T86oMP4 GPU. It offers up 4 cores and a 6ooMHz clock speed. When compared to competitor SBC GPUs, ROCK Pi offers better GPU computingand GPU acceleration performance

 

IO Performance

      ROCK Pi comes with multiple storage options and providing superior read and write performance on external storage drives, allowing quicker read and write speeds. This improves workflow, copying, backups and overall fle usage.

 

 

 

 

Compare versions

 

Model	ROCK PI 4 Model A	ROCK PI 4 Model B
Processor	64bits hexa core processor          Rockchip RK3399          Dual Cortex-72, frequency 1.8GHz with qual Cortex-A53, frequency 1.4GHz          Mali T860MP4 gpu, support OpenGL ES 1.1/2.0/3.0/3.1/3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.
Memory	LPDDR4          64bit dual channel LPDDR4@3200Mb/s, 1GB/2GB/4GB optioal
Storage	eMMC module (Optional industrial compatible high performance eMMC module, 8GB/16GB/32GB/64GB/128GB available)        μSD card (μSD slot supports up to 128 GB μSD card)        M.2 SSD (M.2 connector supports up to 2T M2 NVME SSD)
Display	HD-MI 2.0 up to 4k@60       MIPI DSI 2 lanes via FPC connector       HD-MI and MIPI DSI can work at the same time, support mirror mode or extend mode.
Audio	3.5mm jack with mic       HD codec that supports up to 24-bit/96KHz audio.
Camera	MIPI CSI 2 lanes via FPC connector, support up to 800 MP camera.
Wireless	None	802.11 ac wifi                                                                Bluetooth 5.0                                                                with on board antenna
USB	USB 3.0 OTG X1, hardware switch for host/device switch, upper one       USB 3.0 HOST X1, dedicated USB 3.0 channel, lower one       USB 2.0 HOST X2
Ethernet	GbE LAN	GbE LAN with Power over Ethernet (PoE) support                                                          additional HAT is required for powering from PoE
IO	40-pin expansion header       2 x UART       2 x SPI bus       3 x I2C bus       1 x PCM/I2S       1 x SPDIF       2 x PWM       1 x ADC       6 x GPIO       2 x 5V DC power in       2 x 3.3V DC power in
Others	RTC       RTC battery connector for time backup(optional)
Power	USB PD, support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A.       Qualcomm® Quick ChargeTM: Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A
Size	85mm x 54mm