| Customization: | Available |
|---|---|
| Type: | Development Board |
| Trademark: | NanoPi NEO2 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The NanoPI NEO2 is a newly released super tiny ARM board by FriendlyElec. It uses Allwinner's 64-bit H5 quad-core SoC (ARM Cortex-A53). It has internal hexa-core Mail450 GPU, 512M DDR3 RAM. A UbuntuCore and Armbian image files are ready for it.
The NanoPi NEO2 inherits NEO's form factor and has compatible interfaces and ports with NEO. In addition in such a small dimension it has Gbps Ethernet and one USB host port. These features make it especially suitable for applications that require high data throughput , speedy data transmission and high performance. Hobbyists and makers will just love it.
CPU: Allwinner H5, Quad-core 64-bit high-performance Cortex A53
DDR3 RAM: 512MB
Connectivity: 10/100/1000M Ethernet, RTL8211E-VB-CG chip
USB Host: USB Type A x 1 and USB pin header x 2
MicroSD Slot: MicroSD x 1 for system boot and storage
LED: Power LED x 1, System LED(Blue) x 1
GPIO1: 2.54mm pitch 24 pin-header, compatible with Raspberry Pi's GPIO pin1 - pin 24. It includes UART, SPI, I2C, IO etc
GPIO2: 2.54mm pitch 12 pin-header. It includes USB, IR receiver, I2S, IO etc
Serial Debug Port: 2.54mm pitch 4pin-header
Audio In/Out: 2.0mm pitch 4 pin-header
PCB Dimension: 40 x 40mm
MicroUSB: Power input(5V/2A) and OTG
OS/Software: u-boot,Ubuntu Core
GPIO Pin Spec
|
Pin# |
Name |
Linux gpio |
Pin# |
Name |
Linux gpio |
|
1 |
SYS_3.3V |
|
2 |
VDD_5V |
|
|
3 |
I2C0_SDA |
|
4 |
VDD_5V |
|
|
5 |
I2C0_SCL |
|
6 |
GND |
|
|
7 |
GPIOG11 |
203 |
8 |
UART1_TX/GPIOG6 |
198 |
|
9 |
GND |
|
10 |
UART1_RX/GPIOG7 |
199 |
|
11 |
UART2_TX/GPIOA0 |
0 |
12 |
PWM1/GPIOA6 |
6 |
|
13 |
UART2_RTS/GPIOA2 |
2 |
14 |
GND |
|
|
15 |
UART2_CTS/GPIOA3 |
3 |
16 |
UART1_RTS/GPIOG8 |
200 |
|
17 |
SYS_3.3V |
|
18 |
UART1_CTS/GPIOG9 |
201 |
|
19 |
SPI0_MOSI/GPIOC0 |
64 |
20 |
GND |
|
|
21 |
SPI0_MISO/GPIOC1 |
65 |
22 |
UART2_RX/GPIOA1 |
1 |
|
23 |
SPI0_CLK/GPIOC2 |
66 |
24 |
SPI0_CS/GPIOC3 |
67 |
USB/Audio/IR Pin Descripton
|
NanoPi-NEO2 |
||
|
Pin# |
Name |
Description |
|
1 |
VDD_5V |
5V Power Out |
|
2 |
USB-DP1 |
USB1 DP Signal |
|
3 |
USB-DM1 |
USB1 DM Signal |
|
4 |
USB-DP2 |
USB2 DP Signal |
|
5 |
USB-DM2 |
USB2 DM Signal |
|
6 |
GPIOL11/IR-RX |
GPIOL11 or IR Receive |
|
7 |
SPDIF-OUT/GPIOA17 |
GPIOA17 or SPDIF-OUT |
|
8 |
PCM0_SYNC/I2S0_LRC |
I2S/PCM Sample Rate Clock/Sync |
|
9 |
PCM0_CLK/I2S0_BCK |
I2S/PCM Sample Rate Clock |
|
10 |
PCM0_DOUT/I2S0_SDOUT |
I2S/PCM Serial Data Output |
|
11 |
PCM0_DIN/I2S0_SDIN |
I2S/PCM Serial Data Input |
|
12 |
GND |
0V |
Audio
|
Pin# |
Name |
Description |
|
1 |
MICIN1P |
Microphone Positive Input |
|
2 |
MICIN1N |
Microphone Negative Input |
|
3 |
LINEOUTR |
LINE-OUT Right Channel Output |
|
4 |
GND |
0V |
|
5 |
LINEOUTL |
LINE-OUT Left Channel Output |
Debug PortUART0
|
Pin# |
Name |
|
1 |
GND |
|
2 |
VDD_5V |
|
3 |
UART_TXD0 |
|
4 |
UART_RXD0 |
SYS_3.3V: 3.3V power output
VDD_5V: 5V power input/output. The input range is 4.7V ~ 5.6V. It can take power input from the MicroUSB.
All pins are 3.3V and output current is 5mA
For more details refer to the document: NanoPi_NEO2-1701-Schematic.pdf
){kind=link}