Friendly Nanopi Neo Plus2 Allwinner H5 Gigabit Ethernet Port IoT Development Board WiFi

• Type: Development Board
• Trademark: Friendly NanoPi
• Origin: China
• Model NO.: Friendly NanoPi

Product Description

 

NanoPi NEO Plus2

The NanoPi NEO Plus2 is another Allwinner based ARM board developed by FriendlyElec. It uses Allwinner's 64-bit quad-core A53 SoC with hexa-core Mali450 GPU and features 1GB of DDR3 RAM and 8GB eMMC.
With a small size of only 40 x 52mm the NanoPi NEO Plus2 has rich on-board resources: AP6212A WiFi & Bluetooth module, Gbps Ethernet and two USB hosts. It supports system-boot from a MicroSD card.
The NanoPi NEO Plus2 has a carefully designed power system and 6-layer PCB layout. These features enhance the board's heat dissipation.
The NanoPi NEO Plus2 meets popular IOT applications requirements for small size, high-speed and large throughput data transmission and high performance

 

• SoC: Allwinner H5Quad-core 64-bit high-performance Cortex A53

• DDR3 RAM:1GB

• Storage: 8GB eMMC

• Network: 10/100/1000M Ethernet based on RTL8211E-VB-CG

• WiFi: 802.11b/g/n

• Bluetooth: 4.0 dual mode

• MicroSD Slot: 1 x Slot. It supports system booting or is used to hold a storage card

• Audio Input/Output: 5-Pin, 2.0mm pitch pin-header

• MicroUSB: power input

• Debug Serial: 4Pin, 2.54mm pitch pin-header

• GPIO1:24Pin, 2.51mm pitch double-row pin-header containing UART, SPI, I2C and IO

• GPIO2:12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO

• Power Supply: DC 5V/2A

• PCB Dimension: 40 x 52mm

• PCB Layer: 6-Layer

Software Features(UbuntuCore)

• mainline kernel: Linux-4.x.y

• 64-bit OS

• npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login.

• auto-login with user account "pi" with access to npi-config

• supports Gbps Ethernet

• supports WiFi and Bluetooth

• supports FriendlyElec's FA-CAM202 USB camera

• supports audio recording and playing

 

Diagram, Layout and Dimension

GPIO Pin Spec

Pin#	Name	Linux gpio	Pin#	Name	Linux gpio
1	SYS_3.3V		2	VDD_5V
3	I2C0_SDA / GPIOA12	12	4	VDD_5V
5	I2C0_SCL / GPIOA11	11	6	GND
7	GPIOG11	203	8	UART1_TX / GPIOG6	198
9	GND		10	UART1_RX / GPIOG7	199
11	UART2_TX / GPIOA0	0	12	GPIOA6	6
13	UART2_RTS / GPIOA2	2	14	GND
15	UART2_CTS / GPIOA3	3	16	UART1_RTS / GPIOG8	200
17	SYS_3.3V		18	UART1_CTS / GPIOG9	201
19	SPI0_MOSI / GPIOC0	64	20	GND
21	SPI0_MISO / GPIOC1	65	22	UART2_RX / GPIOA1	1
23	SPI0_CLK / GPIOC2	66	24	SPI0_CS / GPIOC3	67

 

USB/Audio/IR Pin Description

NanoPi NEO Plus2
Pin#	Name	Description
1	VDD_5V	5V Power Out
2	USB-DP1	USB1 DP Signal
3	USB-DM1	USB1 DM Signal
4	USB-DP2	USB2 DP Signal
5	USB-DM2	USB2 DM Signal
6	GPIOL11 / IR-RX	GPIOL11 or IR Receive
7	SPDIF-OUT / GPIOA17	GPIOA17 or SPDIF-OUT
8	PCM0_SYNC / I2S0_LRC	I2S / PCM Sample Rate Clock/Sync
9	PCM0_CLK / I2S0_BCK	I2S / PCM Sample Rate Clock
10	PCM0_DOUT / I2S0_SDOUT	I2S / PCM Serial Data Output
11	PCM0_DIN / I2S0_SDIN	I2S / PCM Serial Data Input
12	GND	0V

Audio

Pin#	Name	Description
1	MICIN1P	Microphone Positive Input
2	MICIN1N	Microphone Negative Input
3	LINEOUTR	LINE-OUT Right Channel Output
4	GND	0V
5	LINEOUTL	LINE-OUT Left Channel Output

Debug PortUART0

Pin#	Name
1	GND
2	VDD_5V
3	UART_TXD0 / GPIOA4
4	UART_RXD0 / GPIOA5 / PWM0

Note:

1. SYS_3.3V: 3.3V power output

2. VVDD_5V: 5V power input/output. The input range is 4.7V ~ 5.6V

3. All pins are 3.3V, output current is 5mA

4. For more details refer to the document: NanoPi-NEO-Plus2-1704-Schematic.pdf