Sdrlab 122-16 Standard Kit

• Type: Development Board
• Trademark: sipeed
• Origin: China
• Model NO.: SDRlab 122-16 Standard kit

Product Description

 

 

 

SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications.

 

What is in the box

- Red Pitaya SDRlab 122-16 board
- SD card (16GB, class 10)
- Ethernet cable (1m)
- Power supply (5V, 2A)

- Tailored for SDR & other RF applications, HF and 50MHz bands

- No DC coupling ! minimum RF Input frequency (-3dB): 300kHz

- Comes with two 16 bit ADCs 50 ohm inputs; 14 bit DACs 50 ohm outputs
- Three times bigger dual core ARM Cortex A9 + Xilinx Zynq 7020 FPGA
- Bigger FPGA provides more real-time processing capabilities
- Hardware compatible with HPSDR
- Improved distortions, dynamic range, sensitivity, noise & crosstalk

 

Product description

SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications.

 

It comes with two 16-bit 50-ohm inputs and 14-bit 50-ohm outputs, Xilinx Zynq 7020 FPGA for real-time processing capabilities plus an ultra-low phase noise 122.88MHz clock which makes it more hardware-compatible with HPSDR compliant applications. RF inputs are optimized for minimal distortion, noise and crosstalk which significantly improves reception and broadens the choice of antenna.

 

 

Basic

Processor	Dual-Core ARM Cortex-A9 MPCore
FPGA	Xilinx Zynq 7020
RAM	512MB (4Gb)
System memory	Micro SD up to 32GB

Connectivity

Ethernet	1 Gbit
USB	USB 2.0
WIFI	Using Wi-Fi dongle

RF inputs

Channels	2
Sample rate	122.88MS/s
ADC resolution	16 bit
Full scale voltage range	-2 dBm
Input Coupling	AC
Bandwidth	300 kHz - 550 MHz
Input impedance	50 Ω

RF outputs

Channels	2
Sample rate	122.8MS/s
ADC resolution	14 bit
Full scale voltage range	+-0.5V / +4 dBm
Load impendance	50 Ω
Shortcut protection	N/A, RF transformer & AC coupled
Typical raising/falling time	N/A
Bandwidth	300 kHz - 60MHz

Extension connector

Digital IOs	16
Analog inputs	4 channels 0-3.5V 12bit
Analog outputs	4 channels 0-1.8V 12bit
Communication interfaces	I2C, SPI, UART
Available voltages	- 4V, + 3.3V, + 5V

Synchronisation

Trigger input	Through extension connector
Daisy chain connection	Over SATA connection
Ref. clock input	N/A