Grove - Temperature & Humidity Sensor (DHT11)

• Customization: Available
• Type: Development Board
• Trademark: seeed
• Model NO.: Grove - Temperature
• Origin: China

Product Description

 

Since the DHT11 has been discontinued, this sensor will be EOL soon. We strongly recommend you use the upgraded DHT20 sensor, that isGrove - Temperature & Humidity Sensor V2.0 (DHT20)

 

Grove - DHT11 Temperature & Humidity Sensor is a high quality, low-cost digital temperature, and humidity sensor based on the DHT11 module.

 

Grove - Temperature & Humidity Sensor uses the upgraded version of DHT11. The new version of the DHT11 module replaces resistive humidity components with capacitive humidity components. The temperature and humidity measurement range are wider. The temperature resolution is higher.

PRODUCT DETAILS

Attention

Since the DHT11 has been discontinued, this sensor will be EOL soon. We strongly recommend you use the upgraded DHT20 sensor, that isGrove - Temperature & Humidity Sensor V2.0 (DHT20)

Features

• Full range temperature compensation calibrated

• Single bus digital output

• High precision capacitive humidity sensor

• Long transmission distance and excellent long-term stability

• Low power consumption

• Cost-effective

Description

Grove - DHT11 Temperature & Humidity Sensor is a high quality, low-cost digital temperature, and humidity sensor based on the DHT11 module.

 

DHT11 is the most common temperature and humidity module for Arduino and Raspberry Pi. It is widely favored by hardware enthusiasts for its many advantages such as low power consumption and excellent long-term stability. Relatively high measurement accuracy can be obtained at a very low cost. The single-bus digital signal is output through the built-in ADC, which saves the I/O resources of the control board.

 

On top of that, Grove - Temperature & Humidity Sensor uses the upgraded version of DHT11.The new version of the DHT11 module replaces resistive humidity components with capacitive humidity components. The temperature and humidity measurement range are wider. The temperature resolution is higher. You can check the following figure for more detail.

 

Comparison between DHT11 and DHT2

There is another famous DHT sensor on our website -- Grove DHT22 . Compared with DHT22, the DHT11 sensor is more cost-effective, but the measurement range and accuracy are lower. The Grove DHT11 can be a low-cost alternative to the Grove DHT22 when accuracy requirements are not as high. Please refer to the following table for the difference between those two:

 

 

ITEM	Grove - DHT11	Grove - DHT22
Humidity
Range	5 ~ 95%RH	0 ~ 100%RH
Accuracy	±5% (Typical)	±2% (Typical)
Temperature
Range	-20 ~ 60	-40 ~ 80
Accuracy	±2% (Typical)	±0.5% (Typical)

 

Applications

• Weather station

• Automatic control

• Testing and inspection equipment

Hardware Overview

hardware overview

 

Technical details

Dimensions	40mm x20mm x8mm
Weight	G.W 10g
Battery	Exclude
Input Voltage	3.3V & 5V
Measuring Current	1.3 - 2.1 mA
Measuring Humidity Range	5% - 95% RH
Measuring Temperature Range	-20 - 60

Part List

Grove - Temperature & Humidity Sensor	1
Grove Cable	1

ECCN/HTS

HSCODE	9025900090
USHSCODE	8517620090
UPC	841454107552

ROHS

1

LEARN AND DOCUMENTS

Documentations

Resources

• DHT11 Datasheet

• Temperature&Humidity Sensor eagle file

• Temperature&Humidity Sensor Library

• CDC File

Learn

[Wiki] Grove - Temperature & Humidity Sensor

This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability

[Project] DIY Humidifier - Grove Water Atomization

Make your own humidifier or scent dispenser using Seeeduino Nano + Grove Water Atomization, keep track of the current humidity with DHT11

[Project] The Environment Cube! Know the Land Beneath You!

A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!

[Project] Toilet Management System

Using the system multiple persons can share a single toilet efficiently.

[Project] Build Biofloc Monitoring System with Wio Terminal

Biofloc fish project monitoring. Water quality maintenance and monitoring in any aquaculture are the essential practices aiming at the success of the growing cycles.

[Project] Arduino-Based Determination of an Air Humidifier Efficiency

Using Arduino and the sensors I analyzed how a small air humidifier can change the parameters of the room and influence the health state.

[Blog] 9 Types of Temperature Sensors You Should Know

With so many temperature sensors available, how should we choose the right one for our Arduino project? Well, it really depends on several factors such as what we are measuring, the degree of accuracy we need and where we may be measuring the temperature.

[Blog] How to Pick the Best Temperature and Humidity Sensor for Your Arduino Project

Different temperature and humidity sensors have large performance differences and large price differences. So how to choose the most suitable sensor for your project?

[Blog] DHT11 vs DHT22 - Which Temperature and Humidity Sensor Should You Use?

Looking for low-cost temperature and humidity sensors? DHT11 and DHT22 are the most common temperature and humidity modules for Arduino and Raspberry Pi. DHT sensors will be perfect for you. Despite being slower than other temperature sensors, they have advantages including low power consumption and excellent long-term stability.