X1 Sbc Motherboard 11th Gen Jasperlake N5105 Quad-Core X86 Development Board Windows10/11/Ubuntu Nvme SSD/M. 2 SATA SSD

• Type: 11th Gen Jasperlake N5105
• Trademark: chipboard
• Origin: China
• Model NO.: 11th Gen JasperLake N5105

Product Description

Descripitions

 

 

Specification
CPU	11th Gen Intel® Jasper Lake N5105 Celeron (CPU operating frequency 2.0~2.9GHz, quad-core quad-thread 10nm TDP 10W)
GPU	Intel® UHD Graphics (Frequency: 450 - 800MHz)
RAM	Onboard 4G / 8G /16G LPDDR4 (optional), recommended is 8GB
Storage	Onboard eMMC: 0/64G/128G/256G (optional)
	MicroSD Slot: MicroSD x1
	M.2 Expansion: Supports NVMe 2280 SSD solid state drive (PCIE3.0) and m.2 SATA 2280 SSD
	SATA Expansion: SATA3 hard drives can be expanded through a SATA adapter board (SATA adapter board accessory needs to be purchased separately)
Networking	Wired network: 1 RJ45 Gigabit Ethernet port
	Wireless network: Expandable through M.2 slot, optional WIFI 5 +BT 5.0 / WIFI 6+ BT 5.2 dual-band WIFI Bluetooth
	4G LTE: Expandable through M.2 slot,pre-configured with EC20 4G data network access
Display output (multi-monitor display)	HDMI interface: HDMI 2.0 4K/60Hz
	Micro HDMI interface: HDMI 2.0 4K/60Hz
	MIPI FPC interface: Default support for SMARTFLY MIPI7LCD (1024*600 LCD touchscreen)
USB	USB-A ports: USB 2.0 *2
	USB-A ports: USB 3.0 *2
	USB headers: USB 2.0 *2
Audio output	3.5mm headphone jack (4-pole),compatible with headset with built-in microphone
	SPK headers: On-board 3W amplifier,compatible with 8-ohm speaker
	HDMI audio output (audio can be transmitted through HDMI to a TV)
Audio input	On-board digital microphone with noise reduction function
	2-pin header: Supports analog microphone with 3.3V power supply for microphone module
M.2 expansion slot	2280 specification: Supports NVMe SSD and M.2 SATA SSD (M-key)
	2230 specification: Supports WIFI5+BT5.0/WIFI6+BT5.2 module expansion or purchase Smartfly 4G adapter board, supports 4G LTE (E-key)
UART serial port	There are 3 UART TTL level serial ports, which can be converted to RS232 or RS485 modules, as well as CAN communication modules
I2C	I2C interface *1, with 4-pin headers for connection Windows/Linux operation examples and tutorials Default voltage is 3.3V
SPI	SPI interface *1, with 5-pin headers for connection Windows/Linux operation examples and tutorials are provided Default voltage is 3.3V
GPIO	GPIO *5, with 6-pin headers for connection Windows/Linux operation examples and tutorials are provided Default voltage is 3.3V
LED lights	On-board red and blue LED lights, 2 in total, with 4-pin headers for parallel connection, facilitating the installation of the entire system The default voltage is 3.3V (Tutorial and API interfaces are provided to control the LED lights, including turning them on/off or enabling heartbeat blinking)
Buttons	Power button *1 Reset button *1 (for resetting BIOS settings)
RTC	RTC socket with SH1.0 specification, can be connected to a CR2032 button battery for maintaining time and enabling scheduled power on/off functionality The RTC has a power consumption of approximately  35mAh per year at 3.3V
Power on	Supports Power on and start up (can be set in the BIOS)
Power	12V DC power input socket, with 2-pin headers for connection It is recommended to use a 12V 3A power adapter
Size	115 * 75mm
Heatsink	FAN socket specification: SH1.0 4-pin socket It comes standard with a heatsink. Power requirement is 5V/0.2A
OS	Windows 10/11 and Linux Ubuntu/Linux Debian (Provide hardware operation tutorials and examples)
NFC	NFC Passive Communication, supports data transfer with mobile phones, compatible with Android and iOS devices.Smartflyprovides examples and API tutorials