Banana Pi Bpi-P2 PRO Rockchip Rk3308 64bits Quad-Core Arm Cortex-A35 with Poe Module 512m DDR3 8g Emmc Support WiFi Bluetooth

• Type: Development Board
• Description: Support WiFi Bluetooth
• Trademark: Banana Pi
• Origin: China
• Model NO.: Banana Pi BPI-P2 PRO

Product Description

 

Introduction

 

Banana Pi BPI-P2 pro(Armsom Pro) is a development board based on RK3308B-S chip. With a high-performance 4-core ARM Cortex-A35 processor, 512M RAM(16bit DDR2/DDR3/DDR3L/LPDDR2). and 8G eMMC onboard ,support PoE function.The chip has a wealth of interfaces, such as I2S,PCM,TDM, I2C,UART,SPDIF,HDMI ARC, etc., to meet the application of different products. RK3308 has a rich voice interface, its own eight ADC interface, multi-channel I2S and multi-channel PDM interface. This not only provides customers with a wealth of interface choices, but also can reduce the hardware design difficulty and hardware design cost of products.

 

Banana Pi BPI-P2 Pro has 512MB DDR3 memory size, operating system and storage can use SD card or emmc. BPI-P2 Pro is available as an onboard storage version with 1Gb/2Gb/4Gb/8Gb NAND flash

 

Application direction

 

• Maker DIY




• IoT Smart Internet of Things




• Intelligent speech recognition,




• Man-machine interface,




• Industrial control,




• Intelligent robot.





 
•  
•  

 

Key Features

 

• CPU: 64bits Quad-core Arm Cortex-A35 Rockchip RK3308.




• 512 DDR3 SDRAM.




• 8G eMMC flash onboard.




• WiFi (AP6256) & Bluetooth onboard.




• 40 PIN GPIO,It includes UART, SPI, I2C, IO etc




• 100M LAN




• IEEE 802.3af PoE standard PoE module support





 
•  
•  

 

Getting Start

 

Getting Start with BPI-P2 Pro

 

Hardware

 

Hardware interface

 

 

 

Hardware spec

 

 

 

	Banana Pi BPI-P2 pro
SOC	RockChip RK3308B-S
CPU	Quad-core ARM Cortex-A35
GPU	none
ROM	512MB
RAM	8GB ,eMMC
TF Card	TF card (Max 64GB)
Network	100M LAN
PoE power	PoE function support,Output Voltage 5V, Output Power 10W
WiFi	AP6256
Audio Output	With built-in audio CODEC, including ADC×8 and DAC×2
Power Source	TYPE C 5V/2A or PoE power
USB	1xUSB 2.0 1xType-C
Others	Fan,RTC,LED,debug
Button	Power Button,Reset Button, Recovery Button,Root Button
Low-level peripherals	40 Pin + 12 Pin
uart GPIO\(1x3\) pin	UART, ground
LED	Power led & Status led
Product size	65mm X 52.5mm
Weight	30g

 

 

 

HardWare Specification of Banana pi BPI-P2 Zero VS BPI-M2 zero VS Raspberry Pi Zero W
Module	Banana Pi BPI-P2 Pro	Banana Pi BPI-P2 Zero	Banana Pi BPI-M2 ZERO	Raspberry Pi Zero W
CPU	Quad-core Arm Cortex-A35 Rockchip RK3308	Allwinner H3/H2+ Quad-core Cortex-A7 H265/HEVC 1080P	Allwinner H3/H2+ Quad-core Cortex-A7 H265/HEVC 1080P	Broadcom BCM2835 32 Bit 1 GHz ARM1176JZF-S single-core
GPU	NOPE	Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0	Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0	VideoCore IV
Memory \(SDRAM\)	512M	512M DDR3(shared with GPU)	512M DDR3(shared with GPU)	512 MB DDR2
Onboard Storage	TF card \(Max. 64GB\)	TF card \(Max. 64GB\)	TF card \(Max. 64GB\)	TF card \(Max. 64GB\)
Onboard Network	100M LAN	100M LAN	NOPE (but can extension with PIN define)	NOPE
PoE power	PoE function support	PoE function support	NOPE	NOPE
Onboard flash	8G eMMC	8G eMMC	NOPE	NOPE
Onboard WIFI	SDIO AP6255	SDIO AP6212(option AP6181,AP6335)	SDIO AP6212(option AP6181,AP6335)	802.11n wireless, Bluetooth 4.1
Video decoding		1080p@60fps,H.264 Video encoding 1080p@30fps,H.264	1080p@60fps,H.264 Video encoding 1080p@30fps,H.264	1080p30 H.264/MPEG-4 AVC high-profile decoder and encoder
Video input		A CSI input connector Camera	A CSI input connector Camera	CSI camera connector
Video Outputs		mini HDMI 1.4,1080P@30fps, DHCP	mini HDMI 1.4,1080P@30fps, DHCP	Mini HDMI and USB On-The-Go ports
Audio Output	With built-in audio CODEC, including ADC×8 and DAC×2	Mini HDMI	Mini HDMI	Mini HDMI
Power Source	TYPE C 5V/2A or PoE power	Micro USB with 5V/2A or PoE power	Micro USB with 5V/2A	5V/2A
USB Ports	one USB 2.0 OTG USB3.0 Type-C OTG	one USB 2.0 OTG	one USB 2.0 OTG	one USB 2.0 OTG
Buttons	Recovery ,Reset	Power Button, Reset Button	Power Button, Reset Button	Composite video and reset headers
Low-level peripherals	40 Pin + 12 Pin	40 Pins Header,compatible with Raspberry Pi 3	40 Pins Header,compatible with Raspberry Pi 3	40 PIN
uart GPIO\(1x3\) pin	UART, ground	UART, ground	UART, ground	UART
LED	Power led & Status led	Power led & Status led	Power led & Status led	Power Status LED
IR	N/A	N/A	N/A	N/A
Supported OS	linux	android linux	android linx	Linux
Product size	65mm X 52.5mm	65mm X 52.5mm	65mm × 30mm	65mm x 30mm
Weight	30g	30g	15g	9g