Customization: | Available |
---|---|
Type: | Development Board |
Trademark: | Arducam |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item Description:
The Arducam 16MP MIPI camera module is mainly designed for Raspberry pi boards and it can be connected directly to RPi's CSI-2 camera interface without additional hardware. This camera module incorporates SONY 1/2.8−inch CMOS which adopts Exmor-R technology to achieve high-speed image capturing with high sensitivity and low noise performance. "RGBW coding" color filter is employed, and RGB primary color mosaic is reproduced on the chip. High sensitivity, low dark current, and smear-free features are achieved. It equips an electronic shutter with variable integration time.
This MIPI camera module can be used on other ARM, FPGA, DSP, or Nvidia TX1/TX2 hardware platform as well.
Note:
Please note that it is the RAW sensor which doesn't include ISP (Image Signal Processing) on the image sensor chip, so it only supports manual exposure, manual white balance, manual gain settings.
Features:
Support all Raspberry Pi Models: Same interface, all-model support. Directly plugged into Raspberry Pi's native high-speed MIPI CSI-2 port. Support Raspberry Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero and more. NOTE: Raspberry Pi motherboard is not included in the package
Higher Resolution than V2 cameras: 1/2.8" 16MP Sony IMX298 Pi camera module to break Raspberry Pi camera's 8MP ceiling with double resolution and larger sensor
Frame Rates: Capture video at 4672x3496/7fps, 1080p/55fps and 720p/120fps resolutions
Applications: Better for Raspberry Pi camera applications where higher resolutions are needed for capturing clearer images, such as advanced driver assistance (ADAS) and multimedia applications of virtual reality (VR) and augmented reality (AR)
Disclaimer: Arducam MIPI cameras are for advanced users with a certain degree of development background. The RPI camera driver is not V4L2 compliance, and it can't work with native Raspberry Pi camera drivers, commands, and software. You have to use Arducam SDK and examples
Optical format: 1/2.8−inch
Effective focus lens : 4.04mm
F.No :2.0±5%
Active pixels: 4656 H × 3496 V
Pixel size: 1.12um x 1.12um
Color filter array: RGBW Bayer pattern
ADC resolution: 10−bit, on−chip
Output Interface: 2-Lane / 4-Lane MIPI
Frame Rate: 16MP full resolution at 30fps
FOV 60 degrees
Support all series Raspberry pi boards
Application:
Cellular phones
PDAs
Toys
Other battery-powered products
ARM/FPGA/DSP based platforms
Package Including:
1pcs Arducam MIPI IMX298 16MP Color Camera Module
1pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
1pcs 80mm 22pin 0.5mm pitch FPC cable
Additional Resources:
Arducam Documentation - Arducam Cameras for Raspberry Pi
Github - Arducam 16MP IMX298 Color Pi Camera
Video - Arducam 16MP IMX298 Color Pi Camera