Dstouch Ds4t1012

• Type: Oscilloscope
• Description: Support Fft Spectrum Analysis.
• Trademark: chipboard
• Origin: China
• Model NO.: DS4T1012

Product Description

 

Main Features:

 

• Dual channels


• 150MHz analog bandwidth


• Maximum sampling rate 1GSa/s


• Maximum storage depth 16Mpts


• Support FFT spectrum analysis


• Support real-time protocol decoding


• Support signal generator function


• 4.3-inch IPS capacitive touch screen


• Ultimate portability (117x77x20mm)


• Large capacity lithium battery


 

 

External Interfaces:

 

• Type-C USB interface (for charging and connecting to PC as a USB drive)


• Mini HDMI (customized function expansion interface, not for display extension)


• 3 buttons (Power/Start-Stop/Auto)


• 2 indicator lights (Power/Charging)


• 1 MCX interface (signal generator)


• 2 BNC interfaces (standard probe interface + Pogo Pin extended contact points)


• Probe compensation test signal (~1KHz square wave + ground terminal)


 

 

Charging Requirements

 

• Charging voltage: 5VDC±5%


• Charging current: maximum 2A


 

 

 

 

 

 

 

 

Technical specifications

 

Vertical System:

 

Analog Bandwidth:	150MHz
Input Coupling:	DC or AC
Input Impedance:	1MΩ // ~17pF
Vertical Sensitivity Range:	10mV/Div to 5V/Div
Vertical Resolution:	8bits
Maximum Input Range:	peaks ≤ 200V
DC Gain Accuracy:	±4%
Vertical Position:	±4 divisions
Vertical Offset:	Volts/Div setting                Range after offset 10mV/Div ~ 5V/Div          ±80mV ~ ±40V/Div
Common Mode Rejection Ratio (CMRR):	-
Channel Isolation:	-

 

Horizontal System

 

Maximum Sampling Rate (Single Channel):	1GSa/s
Maximum Sampling Rate (Dual Channel):	500MSa/s
Time Base Range:	1ns/Div to 10s/Div
Acquisition Duration at Maximum Sampling Rate:	16ms
Storage Depth:	8Mpts (dual channel) 16Mpts (single channel)

 

Trigger System

 

Trigger Modes:	Auto Normal (ch0, ch1)
Trigger Position:	0% ~100%
Holdoff Range:	0 ~ 1 s
Trigger Types:	Edge (rising/falling)
Trigger Sensitivity:	0 ~ 0.5 divisions
Trigger Level Range:	±3.75 divisions

 

 

 

 

 

 

 

Waveform Measurements

 

 

Manual Measurements:	PulseWidth / Frequency / Period Voltage Amplitude
Automatic Measurements:	Frequency / Period / +Duty Cycle / -Duty Cycle / +Pulse Count Rising / Falling / +Pulse Width/ -Pulse Width / Burst Width Amplitude / High Level / Low Level / RMS / Average Peak-Peak/ Maximum / Minimum / +Overshot / -Overshot
Cursor Measurements:	X cursor Y cursor

 

 

 

 

 

 

 

Waveform display

 

Time-domain waveform:	Real-time waveform Single acquisition
X-Y mode:	Lissajous figure
Persistence mode:	2-level dynamic persistence

 

Waveform analysis

 

FFT:	Spectrum Frequency range: 1Hz - 999MHz Vertical ruler: Linear RMS or DBV RMS Window function: Rectangle, Hann, Hamming, Blackman, Flat_top
Protocol decoding:	Real-time protocol decoding Supported protocols: Uart / I2C / SPI / … Formats:Decimal / Hexadecimal / ASCII

 

Signal Generation

 

Waveform types:	Sine / Square / Triangle / Sawtooth
Frequency range:	0 - 100KHz (adjustable)
Amplitude range:	0.5V - 3V (adjustable)
Duty cycle:	10% - 90% (adjustable)

 

 

 

 

 

 

   

What's in the Box

 

• DSTouch DS4T1012 x1


• USB Data Cable x1


• 200MHz Bandwidth Probes x2


• MCX to BNC Signal Cable x1


• Carrying Case x1