Genesys2 Kintex-7 Xilinx Fpga Risc-V Development Board Xup Digilent

 

 

 

 

Product Description Digilent Genesys 2 is a powerful Kintex-7 based on Xilinx™FPGA chip's high-performance open-to-use digital circuit development platform. Genesys 2 features large capacity, high-speed FPGA, fast external memory, high-speed digital video ports, and powerful scalable options, making it ideal for data and video processing applications. Genesys 2 has built-in peripherals including Ethernet, audio, and USB 2.0, enabling it to support a wide range of applications. Fully filled high-speed HPC connectors also make them highly scalable. Compared with the first generation of Virtex-5 based on Genesys chips, Kintex-7 2 equipped with Genesys FPGA chips provides more capacity, higher performance and more resources. Product features: 50,950 logical units (7 times higher), each unit has 4 6-input and 8 triggers Fast random access memory close to 16Mbit (up 7 times) 10 clock management modules, 8 with phase-locked loop (PLL) 840 DSP slices (7 times higher) The internal clock speed exceeds 450MHz. On-chip analog-to-digital converter (XADC) Up to 10.3125Gbps Gigabit Transceiver 1800Mbps DDR3 data rate and 32-bit data width Commercial-2 speed rating Genesys 2 has improved many ports and peripheral devices at the same time, including: Fully filled with 400-pin FMC connector with 10 GTX lines USB-UART bridging 128x 32 pixel OLED 16-bit VGA connector Pmod of XADC signal 2 Display Port connectors with 4 lines interface and sources 10/100/1000 Ethernet PHY 1GB 1800 Mbps on-board DDR3 USB 2.0 host/device/OTG PHY Dedicated USB port, JTAG programming and data transmission card connector Audio codec with 4 3.5mm jacks Serial flash memory 5 Pmod ports USB host mouse, keyboard and USB MSD host storage Genesys 2 can be programmed in a variety of ways, including USB thumb drives, microSD, on-board non-volatile flash memory, and on-board USB-JTAG program circuits. Genesys 2 compatible with Xilinx's latest high-performance Vivado®And ISE tool chain, including ChipScope and EDK. Vivado comes with all required on-line drivers, so no separate installation is required. Products include: Genesys 2 Kintex-7 FPGA Development Board Digilent special carton with protective foam USB A to Micro-B programming wire and A 12V,3A power adapter for US and EU adapters