| Customization: | Available |
|---|---|
| Type: | Banana Pi |
| Trademark: | chipboard |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Banana Pi BPI-M4 ZERO Allwinner H618 Quad-core ARM Cortex™-A53 Processor 2.4GIntroduction/5G WIFI 2G LPDDR4 8G eMMC Single Board Computer
Introduction |
Banana Pi BPI-M4 Zero is the successor model of M2 Zero. It has a huge improvement in performance. The SOC is upgraded to H618 and the CPU frequency is increased by 25%. The memory is upgraded to DDR4, the capacity is quadrupled, and 8G eMMC is added. It supports 5G WiFi, and the USB interface has also been upgraded to type-C.
It has the same form factor and 40-pin connector as the Raspberry Pi Zero W, and it will fit most Zero W cases and accessories.
Allwinner H618, Quad-core ARM Cortex™-A53 processor
ARM Mali G31 GPU
2.4G/5G WIFI & Bluetooth 4.2
2G LPDDR4 RAM
8G eMMC flash memory
1x USB2.0 Type-C OTG, 5V power supply
1x USB2.0 Type-C
1x miniHDMI 2.0a
1x USB2.0
1x 100Mbps Ethernet
Getting Started with BPI-M4 Zero
|
Hardware Specification of Banana pi BPI-M4 Zero |
|
|
CPU |
Allwinner H618, Quad-core ARM Corte |
|
GPU |
ARM Mali G31 GPU |
|
Memory |
2 GB LPDDR4 |
|
Storage |
8G eMMC flash |
|
SD card |
MicroSD card slot, SDIO3.0 |
|
Wireless |
2.4G/5G WiFi and Bluetooth 4.2 |
|
HDMI |
1x miniHDMI 2.0a (up to 4K@60Hz with HDR10, CEC, DDC, SCDC), HDMI digital Audio output |
|
USB |
1x USB2.0 Type-C HOST, 1x USB2.0 Type-C OTG |
|
40-pin header |
28 pins GPIO and Power (+5V, +3.3V and GND) |
|
UART, SPI, TWI/I²C, PWM, PCM/I²S |
|
|
24-pin FPC |
0.5mm pitch FPC connector, 1x USB2.0, 1x IR, 1x 100Mbps Ethernet |
|
9 pins GPIO, UART,TWI/I²C, PWM, PCM/I²S |
|
|
Buttons |
Reset, FEL |
|
LED |
Power Status and Activity status |
|
Power |
5V@3A via USB Type-C |
|
Size |
65mm × 30mm |
|
Weight |
|
){kind=link}