New Raspberry Pi Compute Module Cm4 to Cm3 Io Board Development Platform

• Type: Raspberry Pi
• Input Power: 5V DC
• Compliance: for a Full List of Local and Regional
• Memory: 1GB 2GB 4GB or 8GB Lpddr4
• Production Lifetime: Raspberry Pi Compute Module 4
• Product Name: Raspberry Pi Cm4 to Cm3
• Model NO.: RA728
• Color: Blue
• Overview: Cm4 Module to Cm3
• Application: Cm4 to Cm3
• Form Factor: 55 mm * 40 mm
• Operating Temperature: 0-80
• Trademark: chipboard
• Origin: United Kingdom

Product Description

New Raspberry Pi Compute Module CM4 to CM3 IO Board Development Platform

WARNINGS • Any external power supply used with Raspberry Pi Compute Module 4 shall comply with relevant regulations and standards
applicable in the country of intended use. • This product should be operated in a well-ventilated environment, and if used inside
a case, the case should not be covered. • Whilst in use, this product should be placed on a stable, flat, non-conductive surface,
and should not be contacted by conductive items. • The connection of incompatible devices to Compute Module 4 may affect
compliance, result in damage to the unit, and invalidate the warranty. • All peripherals used with this product should comply with
relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Compute Module. •
The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety
requirements are met. SAFETY INSTRUCTIONS To avoid malfunction or damage to this product, please observe the following: • Do not
expose to water or moisture, or place on a conductive surface whilst in operation. • Do not expose to heat from any source;
Raspberry Pi Compute Module 4 is designed for reliable operation at normal ambient temperatures. • Take care whilst handling to
avoid mechanical or electrical damage to the printed circuit board and connectors. • Whilst it is powered, avoid handling the
printed circuit board, or only handle it by the edges to minimise the risk of electrostatic discharge damage.